Posts Tagged fax/
When I log onto Windows, Windows installer tries to begin installing a Fax. How do I stop that?
Posted by in Fax Driver on December 26, 2011

My Question: When I log onto Windows, Windows installer tries to begin installing a Fax. How do I stop that?
If you mean the Native Windows Fax, then just change the Windows settings; Go to control panel, then Add/Remove and then to Add/remove Windows Components; Open that up, Uncheck the Fax Option, and ok that. Unless you have a Modem Setup with a new Telephone line ( which may over-ride this) it should stop the install if you actively stop the option.
But this all depends on the actual Fax option being “installed” by the system
Click on Start, Settings, control Panel, Add/Remove Programs and when the list loads, click on Add/Remove Windows components on the left side of the screen. It takes a few minutes for that to load, but when it does, remove the check mark from Fax service. Click on OK, then close all the windows and restart the computer. The fax prompt should stop now.
It sounds like its the fax software starting up, do you have one of those scanner, printer, fax machine combinations? I know that mine used to always try to boot that up, even after I set it not to. If its a fax program, I wouild just go to the control program, under add/remove programs, and uninstall it? Or, if you’re not using dial- up, make sure the phone cord is not plugged in. I’m not sure if thats the problem, but i hope that helps somehow..
Please leave your answer in the comments! Thanks.
When I log onto Windows, Windows installer tries to begin installing a Fax. How do I stop that?
Posted by in Fax Driver on December 26, 2011

Fax Service: When I log onto Windows, Windows installer tries to begin installing a Fax. How do I stop that?
If you mean the Native Windows Fax, then just change the Windows settings; Go to control panel, then Add/Remove and then to Add/remove Windows Components; Open that up, Uncheck the Fax Option, and ok that. Unless you have a Modem Setup with a new Telephone line ( which may over-ride this) it should stop the install if you actively stop the option.
But this all depends on the actual Fax option being “installed” by the system
Click on Start, Settings, control Panel, Add/Remove Programs and when the list loads, click on Add/Remove Windows components on the left side of the screen. It takes a few minutes for that to load, but when it does, remove the check mark from Fax service. Click on OK, then close all the windows and restart the computer. The fax prompt should stop now.
It sounds like its the fax software starting up, do you have one of those scanner, printer, fax machine combinations? I know that mine used to always try to boot that up, even after I set it not to. If its a fax program, I wouild just go to the control program, under add/remove programs, and uninstall it? Or, if you’re not using dial- up, make sure the phone cord is not plugged in. I’m not sure if thats the problem, but i hope that helps somehow..
What do you think? Answer below please!
FAQ: How can I send the same fax document to a large group by scanning just once using a canon L series fax.? – Fax | How To
Posted by in Fax How-To on July 12, 2011
Question by Sunny: How can I send the same fax document to a large group by scanning just once using a canon L series fax.?
I dont have the user manual as I have bought this fax second-hand for a new small business I have started.
Selected answer:
Answer by Gordon S
There should be a setting in your fax software to fax a group, check you owners manual for the proper settings.
Give your answer to this question please!
I can’t get my fax machine to receive a fax. The phone rings but nothing comes out. What am I doing wrong? – Fax Machine
Posted by in Fax Machine on June 24, 2011

Ask by steller5674: I can’t get my fax machine to receive a fax. The phone rings but nothing comes out. What am I doing wrong?
Answer:
Answer by crossbones668
Make sure it is set to auto receive, and make sure you have the line in the proper slot.
Answer by lilac402009
You may have a paper jam
Answer by RADIOFAN
Check the number of rings you program in your machine to answer in a fax mode.
RADIOFAN
What do you think? Answer below please!
I need to send a fax. where can i do this from? – Fax Computer
Posted by in Fax Computer on June 20, 2011

By John E: I need to send a fax. where can i do this from?
I have a computer(obviously),but no telephone, so i cant do it from here.Can I?
Answer:
Answer by buzzy bee
go to an internet shop and ask for a fax service.
Answer by Hokie_Pokey
You cannot.
You can go to an Office Depot or Kinkos store and they will fax it for a small fee.
Answer by ħ§_ĶîçĶè®
staples, office depot, etc!!!
if u wanna do it at home just watch this tutorial!!!
http://www.youtube.com/watch?v=y84gW_5ZFKE&fmt=18
Answer by robcajay
A fax machine!
Please leave your answer in the comments! Thanks.
Q&A: I have a Dell All-in-One printer with faxing capabilities. My problem is the fax. Up until recently the phone?
Posted by in Fax Computer on May 3, 2011

Ask by T P: I have a Dell All-in-One printer with faxing capabilities. My problem is the fax. Up until recently the phone?
number appeared on my computer asking if I wanted to take the # as a fax with the telephone # displayed. That no longer comes on and when I click on fax, my recieved & sent fax messages are gone. How can I restore my fax?
Best answer:
Answer by Fremen
Your best best is to completely uninstall the printer software and the drivers from your computer. Disconnect the fax from your computer and restart your computer. With the fax/printer disconnected from your computer reinstall the drivers and software This should return your to the functionality you had before.
Give your answer to this question please!
I JUST want to use my MOTOROLA V551 as a dial up MODEM for a FAX. Can anybody give me the modem string?
Posted by in Fax Internet on April 13, 2011
By peedeesuave: I JUST want to use my MOTOROLA V551 as a dial up MODEM for a FAX. Can anybody give me the modem string?
I Googled it but all I get are pages with info trying to conect to internet. All I want to do is fax from Microsoft Fax. Some of the strings will almost work.
The screen lights up on the phone and the number I am dialing appears, but it just disconnects. The Cingular rep and site were no help. Surely someone has this! Please help!!
Best answer:
Answer by tyler
If it is a cable or a DSL modem it will not work. They are only for high speed internet.
Answer by Dragonlord Warlock
When you installed Motorola Phone Tools, it should have configured your dial strings to use the phone as a modem. If it not working, chances are your service does not allow you to mate data calls over the cellular network.
Please Add your own answer in the comments!
I’m going to send fax. How can I do it?
Posted by in Fax Internet on April 11, 2011

Question by Santiago: I’m going to send fax. How can I do it?
I have no fax machine.
I connect to internet via modem.
How can I send fax?
Good Answer:
Answer by Robin G
Your computer might have software that allows you to send a “fax” either by using your scanner or by just sending a text file. You can also use a fax machine at your local postal store or grocer.
Answer by Ford Fanatic
I think you need a fax machine.
Answer by Rudini
Please do not go to Libby’s link above. it is full of malware. AVOID IT.
If you have Windows XP. It should have built in software to send faxes using your existing modem.
While sending a fax, you DO NOT want to be connected to the internet using the same modem!
See link below…
Answer by Dok
with a fax machine!!!
Answer by Keith B
As s’body said: if you have XP, 98 or 2k it has a fax. First you need to set it up (Help FAX) Then when you write a letter you click on “print” and choose FAX. If you have a scanned document on your comp then you’ll need to paste it into a document.
Give your answer to this question please!
