Posts Tagged program
Looking for free internet fax sending program (not ‘free trial’ – really free)? – Fax Driver
Posted by in Fax Driver on January 31, 2012
Fax Service: Looking for free internet fax sending program (not ‘free trial’ – really free)?
I’ve searched on Cnet and Freedownloads, but every program I find is either free trial (and then you have to pay) – or it looks good but doesn’t install or load properly (mobility pass compass for example).
Do you have one that you use and it’s really free and it works for you?
Thanks alot – I’m tired of having to go down to the copy shop to send a fax. Don’t want to buy a printer and fax machine. Don’t want to pay a monthly subscription just to send every once in a while.
I’d even be happy with a service that charged on a per-send basis – a buck or two, so I don’t have to run to the copy shop.
http://www.freepopfax.com/
What do you think? Answer below please!
How to set Windows Picture and Fax Viewer as Default program for vewing photos and fax?
Posted by in Fax Software on January 18, 2012
Fax Service: How to set Windows Picture and Fax Viewer as Default program for vewing photos and fax?
I’d like to use Windows Picture and Fax viewer for viewing images but whenever I double click a picture in My Pictures folder, it opens with Microsoft Picture Editor. The problem is I can’t navigate to other pictures using the left and right arrows. Can you help me?
Next time you double click on image that you want to open, right click on it, then scroll to “Open With” now you might see Windows Picture and Fax viewer but do not click on it. Instead click on “Choose Program…”
After you click on choose program, select Microsoft Picture and Fax Viewer from the list, and check off the item that says “Always use the selected program to open this kind of file” if it is already checked then just click “OK”
From here on out, all those images will open in Windows Picture Viewer.
right clk a pic and choose “Open With”. Scroll to Windows Pic and Fax viewer and check it. Before leaving the popup window, put a check in the box that says “Always use this program to open this file type. Done!!!
Note; you have to do this with each file type you want to open this way. ( .jpg, .gif, etcl)
right click on picture and select “open with”
select “picture and fax viewer”
put the tick mark and open .
next time itself it willl open on that application only ..
.
What do you think? Answer below please!
Program similar to windows picture and fax viewer? – Fax Software
Posted by in Fax Software on January 7, 2012
Fax Service: Program similar to windows picture and fax viewer?
Since microsoft created a deadlock out of GIF i was wondering is there a program that is similar to Picture And Fax Viewer i just need a program that opens as fast as “WPAFV” and please no fastsone, no irfan, and other viewers like that i just need some viewer like picture and fax viewer. Thank’s!
Here’s a list for you to choose from, experiment until you find one you like.
I was going to suggest Irfan for an image viewer, which is a great little free image viewer capable of viewing a wide variety of different image formats. Don’t know why you don’t like it.
If you want something even simpler and all you want to view are GIF, JPG, and PNG images, then just open them up in your web browser: IE, Firefox, Safari, Opera, any of them will work. And you don’t even have to install any other program. Just drag and drop the image onto the browser window.
What do you think? Answer below please!
I need a fax program which can run on microsoft window server 2003.?
Posted by in Fax Software on January 3, 2012
My Question: I need a fax program which can run on microsoft window server 2003.?
I need a fax program that could generate the incoming fax into a .gif file and store at a designated location in my server. Is there such a program?
Thanks
Regards
go to smithmicro and download thier 30 day trial of ht fax message center, great program.
What do you think? Answer below please!
what upgardes do i need to make to run this program? – Fax Software
Posted by in Fax Software on December 1, 2011
Fax Service: what upgardes do i need to make to run this program?
this is my computers current specifications
CPU: Intel® Celeron® D Processor 352
(3.20GHz, 533MHz FSB, 512KB L2 cache)
Operating System: Genuine Microsoft® Windows® XP Media Center Edition 2005
Monitor: Includes eMachines® 15.4″ Widescreen LCD Flat Panel Monitor
Chipset: ATI Radeon™ Xpress 200
Memory: 512MB DDR2 (1 × 512MB), 533MHz (PC4200)
Expandable to 2GB
Hard Drive: 120GB HDD (7200rpm, 2MB cache)
Optical Drive: 16x Multi-format Dual-layer DVD±RW
Media Reader: 9-in-1 Digital Media Manager™ (Memory Stick®, Memory Stick Pro®, MultiMediaCard™, Secure Digital™, CompactFlash®, MicroDrive, SmartMedia, xD-Picture Card™, USB 2.0)
Video: ATI Radeon™ X200-based integrated graphics
Up to 128MB of shared video memory
PCI Express (PCIe x16) slot available
Sound: 6-channel (5.1) high-definition audio
Network: 10/100Mbps integrated Ethernet LAN (RJ-45 port)
Modem: 56K ITU v.92-ready Fax/Modem (RJ-11 port)
Peripherals: Standard multifunction keyboard, 2-button wheel mouse, amplified stereo speakers (USB powered)
Ports/Other: 5 USB 2.0 (1 in front, 4 in back), VGA External Connector, serial port, parallel port, 2 PS/2 ports, 5 audio ports (2 in front, 3 in back)
Dimensions: 14.25″H x 7.25″W x 16″D
Weight: 22.5 lbs
now what upgrades do i need to make in order to run adobe premeire which system requirements are…
Windows
2GHz or faster processor for DV; 3.4GHz for HDV; dual 2.8GHz for HD*
Microsoft® Windows® XP with Service Pack 2 (Service Pack 3 recommended) or Windows Vista® Home Premium, Business, Ultimate, or Enterprise with Service Pack 1 (certified for 32-bit Windows XP and 32-bit and 64-bit Windows Vista)
2GB of RAM
10GB of available hard-disk space for installation; additional free space required during installation (cannot install on flash-based storage devices)
1,280×900 display with OpenGL 2.0–compatible graphics card
Dedicated 7200 RPM hard drive for DV and HDV editing; striped disk array storage (RAID 0) for HD; SCSI disk subsystem preferred
For SD/HD workflows, an Adobe-certified card for capture and export to tape
OHCI-compatible IEEE 1394 port for DV and HDV capture, export to tape, and transmit to DV device
DVD-ROM drive (DVD+-R burner required for DVD creation)
Blu-ray burner required for Blu-ray disc creation
Microsoft Windows Driver Model– or ASIO-compatible sound card
QuickTime 7.4.5 software required to use QuickTime features
Broadband Internet connection required for online services†
You need upgrade RAM up to 1Gb but to make adobe run faster I recommended upgrade to 2Gb
Also make your XP have SP2 package, just go to microsoft to download service pack 2 but if you are get SP3 it better
What do you think? Answer below please!
When I log on to my computer Window Installer 3.1 keeps attempting to download a Photo gallery & fax program?
Posted by in Fax Software on November 30, 2011
Question: When I log on to my computer Window Installer 3.1 keeps attempting to download a Photo gallery & fax program?
I was given the below answer and when I tried it I was unable to locate the program that keeps pooping up to remove it. Is there a nother option? Go to your start menu click on start,then in the run box write MSCONFIG go to the start up tab and look down the list when you find this program in the list uncheck it.And while you are there uncheck anything that does not need to start at start up
Is this part of the HP Image program?
Sounds like a tough one.
Did you try going back a week or so and do a system restore.
Does the program actually install itself and then keep coming up to install it again? cause if it does then you can use the uninstall.
What type of virus protection do you have and try downloading SPYBOT (it’s free) and see if it helps.
That’s about all i can think of.
I recommend you doing a System Restore to an earlier time when your computer was working fine…….good luck
Please leave your answer in the comments! Thanks.
Q&A: What is Mac’s most comparable program to Window’s Picture/Fax viewer?
Posted by in Fax Software on November 25, 2011
Fax Service: What is Mac’s most comparable program to Window’s Picture/Fax viewer?
I need to select multiple jpegs and print them scaled to fit media (8 1/2 x 11). This was SO easy in Windows Picture/Fax viewer.
I can’t seem to get this to work in Finder, iPhoto or even Adobe Bridge….
I’d grab a copy of snagIT by techsmith
What do you think? Answer below please!
How can I make Windows Picture & Fax Viewer the default program for opening photos?
Posted by in Fax How-To on July 27, 2011
Ask by um yea hi: How can I make Windows Picture & Fax Viewer the default program for opening photos?
Selected answer:
Answer by The Darkest Hacker
u right click on any pic click on properties then “change” under open with then put windows fax viewr as the program and now all the pics of this kind will opn with windows fax viewer
Answer by Gomez
Open folder options in control panel.
Go to the file types tab and then under jpg files click the change button and select windows picture and fax viewer as the application.
You can also do this by rightclicking any jpg file > properties > Under Opens with click the change button and then select the app;iaction as windows picture and fax viewer………
Do the same for other filetypes like gif, jpeg,bitmap etc…
Answer by ahsonshaikh
right click on the photo and select open with. A window appears with a programs. Select windows picture & fax viewer. and tick on always open program with this program on bottom of the window.
Answer by CStradling24
Click the start symbol,
On the right click “Default Programs”
Click the first option “Set your default programs”
Select Windows Photo Gallery and then select set this program as my default.
This will make it open all the file types it can by default.
What do you think? Answer below please!
What is the best program out there for doing diagrams for things like office space?
Posted by in Fax Computer on July 21, 2011
By cbr600girl: What is the best program out there for doing diagrams for things like office space?
I have been tasked with coming up with a plan or diagram for office space planning. Our facility is growing at a rapid pace and we are running out of office space. Is there a program out there to help with measurements and seeing the best way to make things fit. I want to be able to show placement of desks, modular furniture, computers, printers, faxes, etc. I heard you can do similar tasks in Microsoft Visio. Any other program recommendations?
Thanks
Answer:
Answer by abizzell4hire
AutoCAD would be your best choice, but you need someone trained in it to use it. You could always go to Wal-Mart and buy on of their planning software.
Answer by Morgie
Microsoft Visio 2007 if you’re happy to pay, or use a 60 day trial – http://office.microsoft.com/en-us/visio/default.aspx
Answer by R.F.
Visio is the best diagramming software available. It’s really easy to create diagrams and floorplans, etc, and very easy to move things around. And if you get to be a more advanced user, it’s fully customizable for more complex diagramming work too.
While you can use AutoCAD for diagrams, it’s more for detailed architecture and schematic drawings, so you may find it more difficult to use.
Please Add your own answer in the comments!
Will your congress man/woman be getting rid of their insurance for the new government program?
Posted by in Fax Email on July 18, 2011
Ask by Ironbutt: Will your congress man/woman be getting rid of their insurance for the new government program?
They have a special elite plan where they get princely treatment. We need to write, email. phone and fax to let them know that unless they willingly join us in any new government program they better not pass it.
www.congress.org
If their elite plan is taxed you can bet WE the taxpayer will pay it for them.
Featured answer:
Answer by d. w.
they should all congressmen and senators anyone in Washington should have the same insurance nothing better than we do .
Answer by MAD BLACK CONSERVATIVE
Honestly, these politicians don’t need it, they are self-insured. And I know damn well Obama wouldn’t sign up his family.
Answer by Steven C
I think we’d better demand they DROP their great “socialized medicine” plan if they DON’T pass a new program!
Since when do you think they EVER make laws that THEY have to abide by, as well as US?
Answer by M.E.
No, they will keep their current plan.
But, there’s a good chance that their elite plan will be taxed, as will all elite health plans (as they should be).
Answer by delphi
It pisses me off! They receive the best this country has to offer on the backs of the taxpayer. But find it perfectly ok to mess with us. I say they are made to pay for their care like the rest of us. Then maybe they’ll change their approach to health care.
What do you think? Answer below please!
